PET is the material widely used for plastic consumer goods.Compare to glass,it is more strength and flexible For both manufacturer and transport cost issues,it is more economic.Design is one of the key factors for PET Bottles in Edible Oil Bottle Packaging Industry.Especially the handle design is critical.
The use of glass
This issue is more complex with respect to glass, with standard formats of 1 and 0.75 litres.Glass has been subject to progressive colourations because of the potential negative effects of light.Over time the use of transparent glass has been abandoned especially in case of extra virgin olive oil and replaced with dark glass (green or brown) even if this type does not effectively shield from the effects of light.The weak point are notoriously diverse:glass is in fact fragile and costly. There is also the issue of weight that has a significant impact on transport costs, as well its low resistance to mechanical damage.
Most Common Handle Designs of PET Bottles for Edible Oil Bottle Packaging
It is common to find the edible oil bottle packaging with handle which can be further divided into”Handle pre-inserted bottle”and”Handle post-inserted bottle”.Here are the introductions of Pre-inserted Handle and Post-inserted Handle of PET Bottles for Edible Oil Bottle Packaging.
Handle pre-inserted Bottle
Pre-inserted handle bottle is made by placing the handle in a mold through manipulator and the fitting place of the handle will be wrapped directly during the blowing.Therefore,the handle bottle would carry more ferce and it is usually used for longer capacity.
Post-inserted handle PET Bottle
Pre-inserted handle bottle is made by placing the handle in a mold through manipulator and the fitting place of the handle will be wrapped directly during the blowing.Therefore,the handle bottle would carry more ferce and it is usually used for longer capacity.
In the design of the handle bottle,the handle’s position is critical since the handle mounted above the body(the middle)is easier for pouring the content.In addition,the handle shall be buried in the body or there shall be strip added on both sides of the bottle body where the handle located to keep it from shaking.In order to accommondate the handle,both sides of the bottle will be too large.Therefore,a pattern or strip is required to strengthen the intensity.By doing so,there will not be the deformation of the water bottle or oil bottle when it is picked up.The parting surface is normally at the handle at the handle and the pouring route is generally straight line to prevent from inverting.
PET as a Packaging for Oil
- In recent years PET has become increasingly used for packaging edible oil.
- When speaking of PET products we mean both the traditional versions and the more recent variations such as recycled rPET in pellets or in flakes.
- There are various reasons for the increasing popularity of PET.
- In the first instance, it is lighter than cans and glass for transport. Then there are other advantages.
- The formats have also promoted widespread diffusion with standardised 5 and 10 litre sizes and others that go well beyond this (up to 25 litres).
How PET Bottles Out perform other Packaging Materials
PET bottles have features that make them better than other packaging alternatives.With plastic recycling gaining success,PET bottles remain and will be the most preferred packaging materials.
HELPING YOUR CUSTOMERS
When selling your essential oil products to customers,it is a good idea to also provide them with a handy list of storage suggestions based on the product they buy.A storage tip sheet for the pure essential oils and the diluted version of the oils should accompany each bottle to ensure customer satisfaction.If customers are not properly storing the oils and early expiration occurs,they may hold you responsible.
Main characteristics for edible oil bottle packaging
These are the main characteristics for good edible oil packaging:
- Attractive: to strengthen identity and product visibility
- Lightness and strength:a ratio to guarantee the best mechanical resistance
- Ergonomics:the ideal shape to make holding easier
- Screening capacity: a light barrier particularly for extra virgin olive oil
Qualities of edible oil container product packaging
Given that we are staying in a globe where our bodies are unknowingly revealed to many and also different sorts of conditions,it ends up being extremely vital for every single household to cook making use of edible oils to remove the chances of any health and wellness risk.These products have impressive qualities.A key factor to think about when discussing edible oils is their product packaging:when you very closely observe them,you wonder just how difficult it needs to be for the suppliers to manage them.